Rockwell Automation 1494V-M70_M7_M72 Variable Depth, Flange Operated Circuit Breaker Operating Mechani - Manual (Page 12)

Enclosure without Handle Cutout
Variable Depth, Flange Operated Circuit Breaker Mechanisms 12
Locating and Installing Door Catch
Publication 1494V-IN105E-EN-P - September 2014 PN-242292 DIR 10000787413 (Version 04)
6
C
B
Enclosure Door Flange
Thickness
K
D
Enclosure
Base
22 - 37 lb-in
TOP VIEW
·
Provided with projections for welding.
· Projections can also be used as a guide for drilling holes.
· Can be used as a template to drill corresponding holes in the enclosure door.
· User to supply the hardware for fastening the bracket.
· Fasteners must provide the degree of ingress protection for the environmental rating of the enclosure.
·
The bracket hardware must be inaccessible to unauthorized personnel.
·
Dimension K (3/4" to 1")
·
When using large disconnect handle kit only (1494F-M2 or -S2), use door catch provided with handle kit.
· When using large disconnect handle kit and small door hardware kits (1494V-L1, -LL1, -L2 or -LL2), use door catch provided with door
hardware kit.
·
Dimension K (1-1/8" to 1-3/8")
· When using large disconnect handle kit only (1494F-M2 or -S2), use door catch (40492-080-02) which can be ordered from factory.
· When using large disconnect handle kit and large door hardware kits (1494V-L3 or -LL3), use door catch provided with door hardware kit.
Door Catch
Mounting Bracket
Door Catch
Mounting Bracket
Door Catch
Door Catch
Top