Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW - Manual (Page 10)

Upgrading your 1394 GMC Turbo Firmware 10
Publication 1394–6.3 – November 1997
6. From the Transfer menu, select Send File. The following
window appears:
7.
If you have a: Then select the:
1394–SJTxx–T–RL module
30810xxx.RAP file from your
disk drive directory.
1394–SJTxx–T module
30800xxx.RAP file from your
disk drive directory.
8. Select Xmodem from the Protocol field.
9. Select Send. The file begins to transfer from your computer to an
unused portion of the 1394 system memory (DRAM).