Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW - Manual

Publication 1394–6.3 – November 1997
Upgrading your 1394 GMC
Turbo Firmware
This publication describes how to update the firmware in your 1394
GMC Turbo (part number 1394–SJT–T–C or 1394–SJT–T–C–RL)
using the HyperTerminal (Win 95) or Terminal (Win 3.1)
communication accessories included with Windows. The 1394
GMC Turbo must be running firmware version 3.5 or later.
This kit contains:
•
One diskette containing your new firmware.
•
One copy of the firmware instructions.
•
One firmware upgrade label.
•
One copy of the firmware release notes.
The firmware upgrade procedure requires you to initialize the 1394.
Initializing the 1394 GMC Turbo resets the drive, defaults all
settings back to the factory settings and clears the GML program
from the drive’s memory.
If you: Go to:
Have a copy of your GML
program
Step 12 of Uploading your
GML Program from your 1394
GMC Turbo.
Do not have a copy of your
GML program Uploading your GML Program
from your 1394 GMC Turbo.
Installation Instructions
Introduction
Before You Begin