beautypg.com

Rockwell Automation 1397 AC Tachometer Interface Card User Manual

Allen-bradley 1397 ac tachometer interface card, Instructions, Contents what this option provides

background image

Instructions

Contents

What this Option Provides

The AC Tachometer Interface Card is designed for use with the
following Reliance tachometers RE-045F, RE-045R or RE-050. The
card provides feedback signals for non-regenerative 1397 drives and
cannot be used in conjunction with the Pulse Encoder Interface Card.

Where this Option is Used

This option may only be used with 1397 Non-Regenerative Drives.

What These Instructions
Contain

These instructions contain the necessary information to install &
configure a 1397 AC Tachometer Interface Card. For additional
information on signal requirements, wire or cable requirements and
parameter programming, refer to the 1397 User Manual, publication
1397-5.0 and the AC tachometer instructions.

Specifications

Topic

Page

What This Option Provides

1

Where This Option Is Used

1

What These Instructions Contain

1

Specifications

1

How to Select an AC Tachometer

2

Installation

3

Tachometer Wiring

6

Setup

6

Item

Specification

Maximum Cable Length:

Refer to the AC Tachometer Instructions

Maximum Power Dissipation:

4W

Maximum Input Voltage from Tachometer: 275V AC rms
Input Impedance:

20k Ohms

Allen-Bradley 1397
AC Tachometer Interface Card

Cat. No. 1397-AC