Rockwell Automation 1203 Serial Communications Module Series A - Manual (Page 51)

7 Chapter
7-1
Specifications
Chapter Objectives The purpose of this chapter is to provide you with background information
and specifications that may be necessary when installing or applying your
Communications Module.
Product Specifications
Open Style Enclosed Style 115/230V AC Enclosed Style 24V DC
Catalog Number: -GM2 –GD2 –GK2
Environmental:
Operating Temperature 0 to 50
_C (32 to 122_F)
0 to 50
_C (32 to 122_F)
0 to 50
_C (32 to 122_F)
Storage Temperature –40 to 85
_C (–40 to 185_F)
–40 to 85
_C (–40 to 185_F)
–40 to 85
_C (–40 to 185_F)
Relative Humidity 0 to 95%, Non-condensing 0 to 95%, Non-condensing 0 to 95%, Non-condensing
Electrical:
Input Voltage Supplied by drive 85 to 264V AC, 1-phase 24V DC, +/– 10%
Input Frequency NA 45 to 63 Hz NA
Input Current NA 35mA maximum 0.4 amps maximum
SCANport Load 60mA DC 60mA DC 60mA DC
Communications:
SCANport Side SCANport Peripheral
Interface
SCANport Peripheral
Interface
SCANport Peripheral
Interface
Serial Side RS-232/RS422/RS485 (DF1) RS232/RS422/RS485 (DF1) RS232/RS422/RS485 (DF1)
Baud Rates 110, 300, 600, 1200, 2400,
4800, 9600, 19.2K
110, 300, 600, 1200, 2400,
4800, 9600, 19.2K
110, 300, 600, 1200, 2400,
4800, 9600, 19.2K
Checksum BCC or CRC BCC or CRC BCC or CRC
Dimensions:
Open (IP00) NEMA Type 1 (IP30) NEMA Type 1 (IP30)
NA 45w x 76h x 123d mm
(1.8 x 3.0 x 4.8 in.)
45w x 76h x 123d mm
(1.8 x 3.0 x 4.8 in.)
Module Compatibility This module is intended for use with devices that communicate via RS232,
RS422, or RS485 hardware standards using the DF1 protocol. It is intended
to provide a means for transmitting messages between these serial-
communications devices and Allen-Bradley SCANport devices.