Rockwell Automation 1000-SB012 Solar Combination Enclosure - Manual (Page 7)

Rockwell Automation Publication 1000-IN002B-EN-P - April 2012
Solar Combiner Enclosure 7
Install an External Mounting Bracket (optional)
You can install an optional mounting bracket, catalog number 598-N13, for the
enclosure.
Use four #8 hardware with mounting brackets or four #10 hardware without
mounting brackets.
Figure 3 - Mounting Bracket Dimensions
10.0 mm
(.40 in.)
7.0 mm
(.28 in.)
57.0 mm
(2.25 in.)
16.0 mm
(.63 in.)
25.2 mm (.98 in.)
Ø24 mm
(.94 in.)
Ø6.83 mm
(.27 in.)
Ø15.95 mm
(.63 in.)
4.0 mm
(.16 in.)
5.7 mm
(.22 in.)
3.0 mm
(.12 in.)
X
Y
Threaded brass insert
M5 x 0.8 mm
(4) places
Mounting Bracket
Base (Bottom View)
Enclosure X Y
1000-SB006
1000-SB012
238 mm (9.38 in.) 238 mm (9.38 in.)
340 mm (13.38 in.) 241 mm (9.50 in.)