Rockwell Automation 1336R REGEN 48,78,180A Precharge Contactor Repl. - Manual (Page 2)

1336 REGEN Precharge Contactor Replacement 2
1336 REGEN-5.14 May, 1998
13
L3 L2 L1
R1 S1 T1
14
R S T PE PE
S1
CAT 1336R-VB048PRE-AN SER A
38.4 AC INPUT K W VOLTS A PH HZ
AC OUTPUT DC OUTPUT
REFER TO USER MANUAL FOR
INSTALLATION ISNTRUCTIONS
48.2 38.4 460 48.2 3 50/60 – – – – –
3 50/60 460
ALLEN-BRADLEY MADE IN U.S.A.
UL ® LIST ED 966X
IN D C O N T E Q
UL ® LIST ED 966X
IN D C O N T E Q C
®
! DANGER
RISK OF SHOCK REPLACE AFTER SERVICING
L3
13
A1 A2
14
L2 L1
R1 S1 T1 S1
Steps 3 and 4
Mounting
Screw
Aux Contact
Leads 13 ,14
AC Coil Leads A1 ,A2
Mounting
Screw
Mounting
Screw Mounting
Screw
1. Remove and lock-out all incoming power to the 1336 REGEN Line
Regeneration Package.
2. Remove the Precharge Unit front cover. Measure the voltage at input
power terminals R1–S1–T1 and terminal block TB1 with a voltmeter to
ensure that no voltage is present.
3. Disconnect all leads at the contactor and remove the (4) mounting
screws.
4. Install the new contactor.
Torque the (4) contactor mounting screws to 2.6-4.1 N-m (23-36 lb.-in.).
Torque L1-L2-L3 and R1-S1-T1 to 4 N-m (35 lb.-in.).
Torque A1-A2 and 13-14 to 2.6-4.1 N-m (23-36 lb.-in.).
48 and 78A
Precharge Contactor
Replacement
!
ATTENTION: Replace any guards or shields previously
removed before reapplying power to the 1336 REGEN Line
Regeneration Package. Failure to replace guards or shields
may result in death or serious injury.
5. Reinstall the Precharge Unit front cover.