Rockwell Automation 1336S NEMA 4/12 Enclosure Kit - Manual

Instructions
What this Option Provides The Enclosure Kit provides the required materials to enclose an open
chassis 1336 PLUS or 1336
PLUS II in an enclosure. When properly
installed, each Enclosure Kit is designed to meet IP 65 (NEMA Type
4) standards or IP 54 (NEMA Type 12) standards and permit the drive
heatsink to extend outside the enclosure. You must observe the
general installation requirements that are provided in the installation
section of your drive User Manual.
Where this Kit is Used The Enclosure Kit is used in the following ranges:
What the Kit Contains Each IP 65 (NEMA Type 4) Enclosure Kit contains the following:
• (1) Pre-assembled IP 65 (NEMA Type 4) enclosure with fan 1 .
• (1) IP 65 (NEMA Type 4) permanent adhesive backed gasket.
• M5 x 0.08 x 10M sems or hex head screws.
Each IP 54 (NEMA Type 12) Enclosure Kit contains the following:
• (1) Pre-assembled IP 54 (NEMA Type 12) enclosure with fan 1 .
• (1) IP 54 (NEMA Type 12) permanent adhesive backed gasket.
• 10-32 x 3/8 inch sems or hex head self-tap screws.
1 Fans are not required on A1, A2, and A3 frame enclosures.
Frame
Reference
Enclosure Kit Catalog Number Used with 1336 S/F . . .
A1, A2, A3 1 1336S-AFA3, 1336S-AJA3 AQF05 - AQF50, BRF05 - BRF50
A4 1336S-AFA4B, 1336S-AJA4B BRF75 - BRF100
B1 1336-AFB1A, 1336-AJB1A A007
1336-AFB1B, 1336-AJB1B B007 - B015
1336-AFB1C, 1336-AJB1C C007 - C010
B2 1336-AFB2A, 1336-AJB2A A010 - A015
1336-AFB2B, 1336-AJB2B B020 - B030
1336-AFB2C, 1336-AJB2C C015 - C020
C 1336-AFCA, 1336-AJCA A020 - A030
1336-AFCB, 1336-AJCB B040 - BX060
1336-AFCC, 1336-AJCC C025 - C060
1336 PLUS and PLUS II IP 65/54
(NEMA Type 4/12) Enclosure Kit