Rockwell Automation 1606-XLP60EQT Power Supply Reference Manual - Manual (Page 2)

All parameters are specified at 24V, 2.5A, 230Vac input, 25°C ambient and after a 5 minutes run-in time, unless noted otherwise.
2 Rockwell Automation Publication 1606-RM014A-EN-P — March 2014
Bulletin 1606 Switched Mode Power Supplies
Power Supply
100-240V Wide Range Input
NEC Class 2 Compliant
Adjustable Output Voltage
Efficiency up to 90.4%
Low No-load Losses and Excellent Partial-load Efficiency
Compact Design, Width only 45mm
Electronic Inrush Current Limitation
Operation down to -40°C
Full Output Power up to +60°C
Large International Approval Package
3 Year Warranty
Description
Compact size, light weight, simple mounting onto the
DIN rail and the exclusive selection of quality components
are what makes this power supply so easy to install and
use within seconds.
A rugged electrical and mechanical design as well as a
high immunity against electrical disturbances on the
mains ensures reliable output power. This power supply
offers superior protection for equipment connected
to the public mains network or exposed to a critical
industrial environment.
This series of power supplies offers output voltages from
5 to 56Vdc and power ratings from 15W to 120W.
Principal characteristics of the 1606-XLP60EQT are the
electronic inrush current limitation and our power
supply's perfect suitability to very low ambient
temperatures. The unit is fully specified down to -40°C.
Specification Quick Reference
Output voltage DC 24V
Adjustment range 24 - 28V
Output current 2.5A at 24V
2.1A at 28V
Output power 60W
Output ripple < 50mVpp 20Hz to 20MHz
Input voltage AC 100-240V -15% / +10%
Mains frequency 50-60Hz ±6%
AC Input current 1.05 / 0.66A at 120 / 230Vac
Power factor 0.54 / 0.44 at 120 / 230Vac
AC Inrush current typ. 6A input voltage
and temperature
independent
DC Input 88-375Vdc below 100Vdc
derating required
Efficiency 88.5 / 90.4% at 120 / 230Vac
Losses 7.8 / 6.4W at 120 / 230Vac
Temperature range -40°C to +70°C operational
Derating 1.5W/°C +60 to +70°C
Hold-up time typ. 24 / 107ms at 120 / 230Vac
Dimensions 45x75x91mm WxHxD
Weight 250g / 0.55lb
Catalog Numbers
Power Supply 1606-XLP60EQT 24-28V Standard unit
Accessory 1606-XLSBUFFER24 Buffer Module
Certification Marks
UL 508
UL 60950-1
NEC Class 2
Marine EMC, LVD, RoHS
GOST R Marine RINA
C-TICK