Rockwell Automation 802R Sealed Contact Limit Switches - Manual (Page 2)

Copyright © 2012 Rockwell Automation, Inc. All Rights Reserved. PN-156713
10000285055 Ver 00
October 2012
Power, Control and Information Solutions Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
www.rockwel lautomation.com
1.83 (0.072)
O.D. Nylon Tubing
5.59
(0.22)
127
(5)
7.87
(0.31)
Dia.
67.56
(2.66) Max
61.21
(2.41) Min
14.73
(0.58)
21.34
(0.84)
0.5 in. Dia.
NPT
2--5.4 (0.213),
Dia. Holes for
Front Mtg.
45.21
(1.78)
29.46
(1.16)
38.86
(1.53)
59.44
(2.34)
72.14
(2.84)
33.27
(1.31)
12.7
(0.5)
7.87 Dia.
(0.31)
36.83
(1.45)
9.65
(0.38)
Dia.
43.69
(1.72)
1.98
(0.078)
Dia.
317.5
(12.5)
12.7
(0.5)
12.7
(0.5)
33.27
(1.31)
46.74
(1.84)
12.7
(0.5)
51.56
(1.72)
Approximate Dimensions
Standard switch
Top push rod head
Adjustable top push rod head
Side push rod head
Side push roller head
Cat whisker head
Wire wobble stick head
Top push roller head
Renewal parts
If renewal parts are required, give the bulletin number, catalog number, and
series letter found on the name plate.
Travel to
Reset Contact
Travel to
Operate
Contact
Max. Travel
Travel to
Operate Contact
Max Travel
Travel to
Reset Contact
Max Travel
Travel to
Reset Contact
Travel to
Operate Contact
Travel to
Reset Contact
Max Travel
Travel to
Operate Contact
Max Travel
No Contact
Movement
Travel to
Reset Contact
Max Travel
Travel to
Reset Contact
Travel to
Operate Contact
Range of operation
Lever type spring return
Lever operation with standard levers
Lever operation when “one-way”
levers 802T-W7 or -W8 are used
Lever type maintained
These switches should be
mounted so the wobble
stick or cat whisker will not
deflect beyond the
“maximum travel” position.
This avoids excessive
backlash that can cause
undesirable repetition of
contact.
Push type spring return