Rockwell Automation 500LG Coil Replacement Kits - Manual

Instructions
Publication 500LC–IN002A–EN–P May 2005
Coil Replacement Kits 500LC–CCKA1,
500LC–CCKA2, 500LC–CCKA3,
500LC–CCKA4, 500LC–CCKA5 for
Bulletin 500LC Lighting Contactors
Use these instructions to replace the operating coil in Bulletin 500LC Lighting Contactors.
Coil
AC Control Voltage
Coil
110...120V 208...240V 265...277V 347V 440...480V
Kit
No.
500LC–CCKA1 500LC–CCKA2 500LC–CCKA3 500LC–CCKA4 500LC–CCKA5
Be sure that the voltage indicated on the
replacement coil matches the coil voltage
shown on the nameplate.
Figure 1 Coil Assembly
nameplate screws
nameplate
leafspring *
coil
magnetic frame
actuator
base
* leafspring is not used
on 8–...12–pole
Recommended Tools
screwdriver, needle–nose pliers
2–...6–pole
construction shown.