Rockwell Automation 20-750-20COMM-F1 20-750-20COMM and 20-750-20COMM-F1 Communication Carrier Cards User Manual
Rockwell Automation Equipment
Publication 750COM-IN001E-EN-P - September 2012
Installation Instructions
20-750-20COMM and 20-750-20COMM-F1 Communication
Carrier Cards
(Enables a legacy 20-COMM-* adapter to be used with PowerFlex 750-Series Drives)
Step 1
Step 2
Legacy 20-COMM-* Adapter
For compatibility with PowerFlex 750-Series drives, see
the 20-COMM-* Network Adapter Compatibility with
750-Series Drives table in the PowerFlex 750-Series AC
Drive Installation Instructions, publication 750-IN001.
Attach adapter plate
Remove
three standoffs
Attach communication adapter
(1)
A
B
C
20-750-20COMM Card
(for Frames 2 and higher
PowerFlex 750-Series Drives)
20-750-20COMM-F1 Card
(for Frame 1 only
PowerFlex 750-Series Drives)
(1)
The adapter plate (SK-R1-COMMPLT1-F1) is included with the 20-750-20COMM-F1 card.
However, the adapter plate may be ordered separately and added to the 20-750-20COMM
card to create a 20-750-20COMM-F1 card.