Rockwell Automation 440P Small Metal Safety Position Switches - Manual

Installation and Operating Instructions
Bulletin 440P Small Metal Safety Position Switches
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
This publication does not include all specifications, dimensions, or any special installation
considerations. Refer to the product catalog pages for additional information.
General Data
• Safety contacts: 1 N.C.
• Auxiliary contacts: 1 N.O.
• Enclosure rating:
• NEMA 1
• IP66, IP67, IP69K
• Rugged die cast housing
• 2 m prewired cable
• Compact profile for access limited installation
Principles, Standards, and Implementation
Before installation in a safety application, perform a risk
assessment to determine whether the specifications of this
device are suitable for foreseeable operational and
environmental characteristics of the machine which is to be
controlled. Only the normally closed set of contacts are
considered safety contacts. When deploying these limit
switches in a safety system application, all applicable
standards for application should be followed. Operating
specifications must be followed. The actuator must be placed
beyond the point where Direct Opening Action occurs.
Do not use these devices to directly control a motor.
Specifications
Safety Ratings
Standards
EN 954-1, ISO 13849-1,
IEC/EN 60204-1, NFPA 79, EN 1088,
ISO 14119, IEC/EN 60947-5-1,
ANSI B11.19 AS 4024.1
Safety Classification
Cat. 1 Device per EN 954-1 Dual channel
limit switch suitable for Cat. 3 or 4
systems
Certifications
cULus Listed, TÜV and CE Marked for all
applicable directives
Functional Safety Data B10d: 2x10 6 operations
ATTENTION To avoid electrical shock and unintended operation of
equipment, disconnect all power to the limit switch and
the controlled equipment before proceeding with any
repair or adjustment of the limit switch.
Installation of Allen-Bradley Guardmaster products
should be in accordance with local and/or national
codes. Servicing energized industrial control equipment
can be hazardous if not in accordance with
recommended safety procedures.
Contact Ratings
Outputs
Safety Contacts 1 N.C. snap acting
Auxiliary Contacts 1 N.O. snap acting
Thermal Current (/
lth
) 10 A
Rated Insulation Voltage (ui) 300 AC
Short Circuit Protection
10 A max. fast acting fuse IEC 269 type
gG or equivalent
Maximum AC Contact Rating Per Pole (50/60 hz) Same Polarity
NEMA Rating
Designation
Max.
Voltage
Amperes Continuous
Carrying Current
(Amp.)
Voltamperes
Make Break Make Break
AC15/ B300 120 30 3 5 3600 360
AC15/ B300 240 15 1.5 5 3600 360
Maximum AC Contact Rating Per Pole (50/60 hz) Same Polarity
DC13/ Q300 240 0.27 0.27 2.5 69 69
Operating Characteristics
Actuation Speed, Max. 250 mm/s
Actuation Speed, Min. 100 mm/min
Actuation Frequency, Max. 6000 ops/hr
Mechanical Life 1 x 10 7 operations at room temperature
Environmental
Enclosure Type Rating NEMA 1, IP66/IP67/IP69K
Operating Temperature [C (F)] 2…70 ° (35.6…158 °)
Pollution Degree
3
Physical Characteristics
Housing Material Die cast alloy
Actuator Material Various polymers and metals
Mounting 2 x M4, any position
Vibration
IEC 68-2-6 (10…55 Hz, 0.35 mm
amplitude)
Shock IEC 68-2-7 (30 Gn 3 pulses per axis)
Connection 2 m (6.5 ft) cable
Enclosure Color Red body/black head