Rockwell Automation 42JS VisiSight Photoelectric Sensors - Manual (Page 3)

3
Approximate Dimensions [mm (in.)]
31.6 (1.24)
0.6
(0.02)
10.0
(0.40)
M8 x 1.0
thread
M18
mounting nut 17.3
(0.68)
20.0
(0.79)
0.6
(0.02)
2.0
(0.08)
33.0
(1.30)
16.0
(0.63)
26.4
(1.04)
25.4
(1.0)
3.0
(0.12)
Clearance for
M3 or #4--40
screw (2 places)
Sensitivity
Adjustment
14.0
(0.55)
Accessories
18 mm Snap-On Adaptor 
The sensor can be mounted using an 18 mm snap-on adaptor
(60--AJS--18) as shown below. Line up the slotted hole with
the slotted hole on the sensor and snap on.
To remove the sensor from the adaptor, undo the snap by
using a flat screwdriver.
60--AJS--18
60--2657
60- BJS- L1—Mounting Bracket 
12.0
(0.47)
18.6
(0.73)
33.0
(1.30)
14.0
(0.55) 24.0
(0.95)
8.0
(0.32)
15
R.25.4
(R.1.00)
60- BJS- L2—Mounting Bracket 
12.0
(0.47)
33.0
(1.30)
14.0
(0.55)
38.9
(1.53)
18.6
(0.73)
8.0
(0.32)
R.25.4
(R.1.00)
20
10
Swivel/Tilt Mounting
60--BJS--L2 
60--2619
 Damage may occur to snap-on adaptor if torque above 15 inlb is applied to the 18 mm mounting nut.
 Damage may occur to the sensor housing if torque above 2.5 inlb is applied to the mounting screws.
 In high vibration applications, use mounting hardware supplied with the sensor to attach the 18 mm adaptor to the sensor.