Step 5: documenting the change, Related documentation, Pub. no. - date – Rockwell Automation 20P PowerFlex DC Drive Analog and Digital I/O Expansion Circuit Board User Manual
Page 10
Publication 20P-IN002A-EN-P - October 2007
P/N 361879-P01
Copyright © 2007 Rockwell Automation. All rights reserved. Printed in USA.
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions
1S5F19
Step 5: Documenting the
Change
1. Record the installation of the Analog and Digital I/O Expansion circuit
board and date of installation on the Field Installed Option label on the
side of the drive (as shown below).
2. Replace the drive covers in the reverse order of removal as described in
Step 2: Opening the Drive on
3. Install DPI cable (if present).
Related Documentation
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature
.
Frame A Shown
For . . .
Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives
User Manual - PowerFlex Digital DC Drives 20P-UM001…