beautypg.com

Rockwell Automation 20P PowerFlex DC Drive - Frame C Pulse Transformer Circuit Board User Manual

Installation instructions, What this kit includes, Tools that you need

background image

Publication 20P-IN010C-EN-P - February

Installation Instructions

PowerFlex DC Drive Frame C Pulse Transformer Circuit Board

What This Kit IncludeS

Pulse Transformer circuit board
Six screws and washers
6 gate lead cables with connectors (for non-regenerative drives only)
12 gate lead cables with connectors (for regenerative drives only)
Cables for connectors XR and XSW
Static strap

Tools That You Need

Phillips

®

screwdriver

Flathead screwdriver

Phillips

®

is a registered trademark of Phillips Screw Company.

ATTENTION: Only qualified personnel familiar with DC drives and associated
machinery should plan or implement the installation, start-up and subsequent
maintenance of the system. Failure to comply may result in personal injury and/
or equipment damage.

ATTENTION: To avoid an electric shock hazard, ensure that all power to the drive
has been removed before performing the following.

ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions are required when installing, testing,
servicing or repairing this assembly. Component damage may result if ESD
control procedures are not followed. If you are not familiar with static control
procedures, reference A-B publication 8000-4.5.2, “Guarding Against
Electrostatic Damage” or any other applicable ESD protection handbook.