Rockwell Automation 20D-DL2-CL3 DriveLogix Controller Compact I/O Cable - Manual (Page 11)

Compact I/O Cable for DriveLogix™5730 Controller 11
Publication 20D-IN008B-EN-P - August 2004
Step 5: Installing the Compact I/O End of the Cable
When energized bus connections break in hazardous environments,
resulting sparks can cause explosions.
Risk of personal injury and/or equipment damage exists.
Securely lock the bus connectors (tasks D and E below) to avoid this
hazard.
2
3
A D
1
B
C
E
1
C
B
2
3
Left Cover
Right Cover
Task Description
Unlock the Bus Lever on the I/O module accepting the cable cover by pushing
the lever back and then right
Align both of the cable cover’s tongues (1) with the grooves (2) on the side of the
I/O module
Slide the cable cover back onto the module until the bus connectors (3) are
aligned
Lock the Bus Lever on the I/O module by pushing the lever back and then left
until locked
On a right-hand cable cover, lock the Bus Lever by pushing the lever back to
the left until locked
A
B
C
D
E
=
=
ATTENTION
!