Afinia H480 3D Users Manual - Manual (Page 38)

Afinia H480 3D Printer User’s Manual
38
Status Indicator
The table below explains what each Status Indicator state means.
LED State Indicates:
Solid Red
Printer is not initialized; initialize printer either using the
software or the initialize button on the front.
Solid Green Printer is Ready
Flashing 10 times per second Data is transferring to printer
Flashing 5 times per second
1. Extruder is heating
or
2. Extrude or Withdraw Material function in progress
Flashing about 2 times per second Printing in progress
Flashing about every 2 seconds Printing has stopped
Rapid strobing between green and
red Printer is in an error state; power cycle and re-initialize the
printer
Changing Languages
The Afinia software interface can use multiple languages. To change the language in the software,
open the application and enter the key sequence from the table below for the correct language.
The language will change the next time the application is launched.
Key Sequence Language
CTRL+ALT+N PC Default Language
CTRL+ALT+E English
CTRL+ALT+F French
CTRL+ALT+G German
CTRL+ALT+S Spanish
CTRL+ALT+J Japanese
CTRL+ALT+I Indonesian
CTRL+ALT+R Russian
CTRL+ALT+C Chinese
CTRL+ALT+T Traditional Chinese