Yamato Scientific RE510 Evaporators, Rotary - Manual (Page 21)

19
Installation/Assembly
Connecting the Vacuum Hose and Water Supply
19. Connecting the Vacuum Hose and Water Supply
1. Remove plastic threaded joints.
2. Moisten attaching hoses with water for easy attachment.
Do not use any type of lubricating oil.
3. Connect plastic threaded joints to cooling condenser hoses.
(id=9mm)
4. Attach hose clamps to plastic threaded joints.
5. Attach to cooling condenser.
6. Connect plastic threaded joint to vacuum hose.
(id=6mm)
7. Attach to vacuum suction pipe.
(hose clamp is not necessary)
＊ ＊ ＊ ＊Do not connect the hoses to the joints connected to the condenser.
● ● ● ●In case of glass A ● ● ● ●In case of glass B
● ● ● ●In case of glass C
Connect the drain hose.
(id= 18mm)