Yamato Scientific RE510 Evaporators, Rotary - Manual (Page 11)

9
4. Installation/Assembly
RE210
1. Set the stand at a stable place.
Unpack the package and set the stand of the body on a stable place. If you do not set the unit on a
stable place, the unit may vibrate or cause strange noises or the unit can fall and get damaged.
2. Insert the rod into support of the stand.
Insert the support rod into support of the stand, and fix by clamping screw.
3. Attach the arm jack if applicable, and support clamp over the support rod.
1. Turn the Arm Jack Lever counterclockwise to loosen the lever.
2. When you install the arm jack over the rod, set the fix ring and O-ring in the middle of the arm jack
(Insert the O-ring into the hollow sleeve on the fix ring).
3. Fit the motor support clamp over the support rod.
Support Rod
Stand
Clamping Screw
O-Ring
Fix Ring
Arm Jack
Arm Jack Lever
Motor Support Clamp
Unlock
Lock
Attach the arm jack over the
rod turning the arrow up.