Yamato Scientific RE510 Evaporators, Rotary - Manual (Page 18)

16
Installation/Assembly
RE210 and RE510
15. Connecting the Evaporation and Receiving Flasks.
● ● ● ● Evaporation Flask
1. Turn the blue flask remover upward.
2. Connect the flask to the steam duct, and
attach the evaporation flask clamp.
● ● ● ● Receiving Flask
1. Connect the flask to the cooling condenser
or the condenser connector, and attach the
flask clamp.
● For easy evaporation flask removal….
Use the blue flask remover.
1. Remove the clamp while holding the evaporation flask.
2. Turn the remover counter clockwise which will gently push off your evaporation flask.
16. Insert the feed tube into the cooling condenser or cooling condenser
connector (which ever applies). Assembly is now complete.
Flask Remover
Feed Tube