Yamato Scientific RE510 Evaporators, Rotary - Manual (Page 19)

17
Installation/Assembly
Arm Jack for RE210
17. Arm jack JK 200(sold separately and exclusively used for RE210)
● ● ● ● To set at a certain height
1. Turn the lever counter-clockwise to loosen; move up or down to desired height. Picture 1,2
2. When you determine the position, turn the lever clockwise and fasten firmly. Picture 3
3. Adjust the fixed position ring to desired height.
Fasten position ring and lever firmly. Neglecting to fasten tightly may result in
motor falling.
Be cautious when moving the arm lift while glass apparatus is connected or
glassware can be damaged.
Picture 1 Picture 2 Picture 3
● ● ● ●To change the height
1. Turn the lever counter-clockwise to loosen.
(Support the arm jack securely or the motor will immediately drop downward.)
2. Refer to the above description “To set at a certain height”.