WINGITS PREMIUM Grab Bar WGB5PSxx - Manual (Page 2)

20140815_rev1
Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
.5” Cover
Height
Snap-on Cover Grab Bar
Mounting Flange
Grab Bar Tube
Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS
® Grab Bar
Fastening System)
Bolt Circle is 2.3125”
1.25’’
3’’
Overall Length
(Mounting Length +3’’)
Overall Length
(Mounting Length +3’’)
Mounting Center Length
(12’’ to 48’’)
2.75’’
Stainless Steel Screws x 6
O
PTIONAL
H
ARDWARE
(Sold Separately)
Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2
3”
I
NCLUDED
H
ARDWARE