WINGITS PREMIUM MIsc Grab Bar WGB6TRxx - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
20140911_rev1
WGB6TR
Stainless Steel Designer Grab Bar
TRUE Elegance
™
Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.50” (3.8cm)
Entire product is stainless steel.
W ING I TS ®
TRUE Elegance Structural Stainless Steel Grab Bars are designed to hold live loads and
TRUE Elegance
™
must be installed into adequate structural blocking or with W ING I TS ®
Grab Bar Fasteners
Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)
W ING I TS ® ™
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.
For hollow wall construction, it is recommended that W ING I TS ®
Grab Bar Fasteners
are used with this product. See Fastener instructions for applications.
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
CERTIFICATIONS
RECOMMENDED INTEGRATION
Model:
Part Numbers:
WGB6TR12W
12’’ Heavy Structural Aluminum Tube Core
WGB6TR16W
16’’ Heavy Structural Aluminum Tube Core
WGB6TR18W
18’’ Heavy Structural Aluminum Tube Core
WGB6TR24W
24’’ Heavy Structural Aluminum Tube Core
WGB6TR30W
30’’ Heavy Structural Aluminum Tube Core
WGB6TR32W
32’’ Heavy Structural Aluminum Tube Core
WGB6TR36W
36’’ Heavy Structural Aluminum Tube Core
WGB6TR42W
42’’ Heavy Structural Aluminum Tube Core
WGB6TR48W
48’’ Heavy Structural Aluminum Tube Core
• All parts are Stainless Steel - tubing is 18-gauge (1.2mm)
• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc
welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.
• Snap-On Flange Covers are 22 gauge (0.8mm) drawn stainless steel, 3”(76mm)
in diameter and 3/8”(10mm) in height.
• Provide 1-1/2”(38mm) clearance from wall.
• Anti-Slip Grab Bar
Structural Stainless Steel Grab Bars meet or exceed the