WINGITS INFINITE Towel Bar WIETBxx - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
WIETB_SpecSheet_20140325_rev2
WIETBxx
Towel Bar
INFINITE Elegance
™
Width: xx” (See product part number for width)
Projection: 3.125” (7.6cm)
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
W ING I TS ® INFINITE Elegance ™ Towel Bars are designed to be installed into adequate
structural blocking or with W ING I TS ®
Fasteners for INFINITE Elegance ™ Bath Accessories
(MAW35).
Use: Wall Installation. Load Capability: 100 lbs. (45.4kg)
For hollow wall construction, it is recommended that W ING I TS ®
Fasteners for INFINITE Elegance ™
Bath Accessories (MAW35) are used with this product.
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
RECOMMENDED INTEGRATION
Model:
Part Numbers:
Contemporary design combines with a fully HeliArc welded construction,
resulting in a Towel Bar with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
WIETBPS6
6" Polished Finish
WIETBPS12
12” Polished Finish
WIETBPS18
18” Polished Finish
WIETBPS24
24” Polished Finish
WIETBPS30
30” Polished Finish
WIETBPS36
36” Polished Finish
WIETBSN6
6” Satin Finish
WIETBSN12
12” Satin Finish
WIETBSN18
18” Satin Finish
WIETBSN24
24” Satin Finish
WIETBSN30
30” Satin Finish
WIETBSN36
36” Satin Finish
Stainless steel screws are included to install into
adequate structural blocking.