WINGITS PLATINUM Grab Bar WPGB5PSxxTAP - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
20140822_rev3
WPGB5TAP
Stainless Steel Grab Bar - Taper Flange
PLATINUM
™
Width: See product part number for width. Complete length of Grab Bar is usable surface.
Diameter: 1.25” (3.2cm)
Entire product is 18/8 (304) stainless steel.
W ING I TS ® PLATINUM ™ Structural Stainless Steel Grab Bars are designed to hold live loads and
must be installed into adequate structural blocking or with W ING I TS ®
Grab Bar Fasteners
Use: Wall Installation.
Load Capability: 800 lbs (362.9kg)
W ING I TS ®
PLATINUM ™ Structural Stainless Steel Grab Bars meet or exceed the
applicable requirements of all building codes, ADA criteria, and 2010 ADAAG and
2009 ANSI standards.
For hollow wall construction, it is recommended that W ING I TS ®
Grab Bar Fasteners
are used with this product. See Fastener instructions for applications.
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
CERTIFICATIONS
RECOMMENDED INTEGRATION
Model:
Part Numbers:
WPGB5PS12TAP WPGB5SN12TAP
12” Polished Finish
WPGB5PS16TAP
16” Polished Finish
WPGB5PS18TAP
18” Polished Finish
WPGB5PS24TAP
24” Polished Finish
WPGB5PS30TAP
30” Polished Finish
WPGB5PS32TAP
32” Polished Finish
WPGB5PS36TAP
36” Polished Finish
WPGB5PS42TAP
42” Polished Finish
WPGB5PS48TAP
48” Polished Finish
12” Satin Finish
WPGB5SN16TAP
16” Satin Finish
WPGB5SN18TAP
18” Satin Finish
WPGB5SN24TAP
24” Satin Finish
WPGB5SN30TAP
30” Satin Finish
WPGB5SN32TAP
32” Satin Finish
WPGB5SN36TAP
36” Satin Finish
WPGB5SN42TAP
42” Satin Finish
WPGB5SN48TAP
48” Satin Finish
Platinum Flange Style Options
BAND = BAN
HALO = HAL HEX = HEX
ROPE = ROP
BEVEL = BEV
TRI-STEP = TRI
TAPER = TAP
• 7 Bold Flange Designs
• All parts are 18/8 Stainless Steel (Type 304) - tubing is 18-gauge (1.2mm)
• Mounting Flanges are 3”(75mm) in diameter, 3/32”(2.5mm) thick, HeliArc
welded to the tubing. Mounting Flanges have 5 holes for attachment to WINGITS
or adequate blocking.
• High End Cast Stainless Steel threaded Flange covers thread onto the Cast
Stainless Steel Flanges
• Provide 1-1/2”(38mm) clearance from wall.