WINGITS MODERN Toilet Paper Holder Horizontal Vertical WMEHVTPHxx - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
WMEHTPH_SpecSheet_20140226_rev7
WMEHVTPH
WMEHVTPHPS
Polished Finish
WMEHVTPHSN
Satin Finish
Horizontal Vertical Toilet Paper Holder
MODERN Elegance
™
Height: 1.625” (4.1cm)
Width: 6” (15.2cm)
Depth: 3” (7.6cm)
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
Install W ING I TS ®
MODERN Elegance ™ Horizontal Vertical Toilet Paper Holders into adequate
structural blocking (included s/s screws) or into hollow walls with W ING I TS ®
Anchor.
Use: Can be used in horizontal or vertical position.
It is recommended that W ING I TS ®
Master Anchor for MODERN Elegance ™ Bath Accessories
(MAWME35) is used with this product.
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
RECOMMENDED INTEGRATION
Model:
Part Numbers:
Stainless steel screws are included to install into
adequate structural blocking.
Contemporary design combines with PATENTED BridgeBind ™
Technology resulting in a Toilet Paper Holder with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind ™ Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc Welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.