WINGITS MODERN Double Robe Hook WMEDRHSN/PS - Manual

Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [email protected]
WMEDRH_SpecSheet_20140317_rev2
WMEDRH
WMEDRHPS
Polished Finish
WMEDRHSN
Satin Finish
Stainless Steel Double Robe Hook
MODERN Elegance
™
Height: 1.625” (4.1cm)
Width: 3” (7.6cm)
Depth: 2.125” (5.4cm)
Entire product is 18/8 (304) stainless steel. Solid caps and pins are HeliArc welded to 18 gauge
tube.
W ING I TS ®
Stainless Steel Double Robe Hooks are designed to be installed into adequate
structural blocking.
Use: Wall Installation.
It is recommended that W ING I TS ®
Master Anchor for MODERN Elegance ™ Bath Accessories
(MAWME35) is used with this product.
Weight: 6 oz. (170g)
MECHANICAL DATA
PRODUCT COMPOSITION
MODALITY
INSTALLATION
RECOMMENDED INTEGRATION
Model:
Part Numbers:
Stainless steel screws are included to install into
adequate structural blocking.
Contemporary design combines with PATENTED BridgeBind ™ Technology
resulting in a Robe Hook with:
• Unparalleled strength
• Beauty
• Functionality
• Durability
• No lines for dirt to collect
(maintenance free)
BridgeBind ™ Technology is the result of drilling a hole completely through stainless steel
tubing, inserting a solid stainless steel pin, and HeliArc Welding the pin to the far point of
the tube; solidifying the pin and tube into one piece. Creating the ultimate structural bond.