Bosch VG4-200 - Manual (Page 49)

AutoDome Modular Camera System Configuring and Using the IP AutoDome | en 45
Bosch Security Systems, Inc. VG4-200, VG4-300, VG4-500i Series User’s Manual F01U064036 | 1.0 | 2007.01
To manually pan throughout the image area, move your cursor over any part of the live video.
The image area displays a directional arrow (ONMPKLJI), then press and hold the right
mouse key to pan the camera.
Digital I/O
Depending on the configuration of the IP AutoDome, the alarm relay outputs are displayed
next to the camera image. The relay on the camera allows you to operate a device (for exam-
ple a light or a door opener). To operate, click the relay symbol next to the video image, only if
alarms are not active. The symbol is yellow when the relay is activated.
Fig. 8.4 Digital I/O Panel
System and Event Logs
The System Log field contains information about the operating status of the IP AutoDome and
the connection. The Event Log contains information about alarm conditions. The following fig-
ure illustrates the System and Event logs.
Fig. 8.5 System and Event logs