Bosch VG4-200 - Manual (Page 32)

28 en | Pelco On-Screen Menus AutoDome Modular Camera System
F01U064036 | 1.0 | 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.
5.1.1 Command Lock (locked)
The Pelco Command Lock Menu allows or prohibits the use of locked commands. The default
setting is ON.
5.1.2 Bosch Menu (locked)
The Bosch Menu allows full access to the AutoDome main Setup Menu and all AutoDome con-
figuration settings.
Refer to Chapter 2: On-Screen Display Menu Navigation for a complete description of Bosch
menus and configuration settings.
i
NOTICE! After a period of 4.5 minutes of inactivity, the OSD menu times-out and exits without
warning. Some unsaved settings can be lost!
i
NOTICE! If the Command Lock is set to ON and you press Focus or Iris on a locked command,
the AutoDome displays the on-screen message: "Command is Locked."
Pelco menu Bosch menu
Setup Menu Setup Menu
Exit...
Command Lock: OFF Exit...
Bosch Menu Camera Setup
Camera Setup Lens Setup
PTZ Setup PTZ Setup
Edit Password Display Setup
*FastAddress: Not Set Communication Setup
Advanced Alarm Setup
Software Version Language
Ack and Reset Alarms Advanced
Restore All Settings Diagnostics
Reset All Memory
* = Factory Setting
Focus / Iris: Select
Focus / Iris: Select