beautypg.com

5pelco on-screen menus, 1 setup menu – Bosch VG4-200 User Manual

Page 31

background image

AutoDome Modular Camera System

Pelco On-Screen Menus | en

27

Bosch Security Systems, Inc.

VG4-200, VG4-300, VG4-500i Series User’s Manual

F01U064036 | 1.0 | 2007.01

5

Pelco On-Screen Menus

You can program the AutoDome through the Pelco on-screen display (OSD) menus. To access
the Pelco menus, you must configure the AutoDome for Pelco Mode and invoke the Pelco
main Setup Menu.

5.1

Setup Menu

The Pelco main Setup Menu provides access to the programmable AutoDome settings. Some
menu items are locked and require a system password to use. Menu items marked with an *
are the default settings.

To open the Pelco main Setup Menu (locked commands):
1.

Press 95-PRESET (press the PRESET button for approximately 2 seconds to open).

2.

Use the joystick to highlight a menu item.

3.

Press either the Focus or the Iris key to open a menu item.

4.

Follow the on-screen instructions at the bottom of the screen.

Setup Menu

Exit...

Command Lock:

OFF

Bosch Menu

Camera Setup

PTZ Setup

Edit Password

*FastAddress:

Not Set

Advanced

Software Version

Ack and Reset Alarms

Restore All Settings

Reset All Memory

* = Factory Setting

Focus / Iris: Select

i

NOTICE! Use Zoom to select the Exit item from anywhere in a menu.

Menu

Description

Exit

Exits the menu.

Command Lock (locked)

Allows or prohibits accessing locked commands. (If password is set, you are
prompted to enter the password.

Bosch Menu (locked)

Accesses the full AutoDome configuration menu and all AutoDome settings.

Camera Setup

Accesses the White Balance and Night Mode camera settings.

PTZ Setup

Accesses the tours, tour periods, scan speed, edit presets, limit stops, record-
ing, and AutoPivot settings.

Edit Password (locked)

Changes the password.

FastAddress (locked)

Sets or changes a camera address.

Software Version

Displays the current software versions.

Ack and Reset Alarms

Acknowledges and resets active alarms.

Restore All Settings
(locked)

Restores all settings to their original default setting.

Reset All Memory (locked) Clears all settings, including scene shots, tours, and recordings stored in the

AutoDome memory.

This manual is related to the following products: