Bosch VG4-200 - Manual (Page 22)

18 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
F01U064036 | 1.1 | 2007.01 VG4-200, VG4-300, VG4-500i Series User’s Manual Bosch Security Systems, Inc.
2.8 Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
existing rule. The default setting is Empty.
Rule Setup Menu Choices:
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows
you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is
configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)
through its configuration menu.
i
NOTICE! You can program a total of 12 rules. You must define the inputs and outputs before
you program a rule. See Section 2.7: Alarm I/O Setup on page 16 for instructions on configuring
alarm inputs and outputs.
Rule Setup... Rule 1
Exit... Exit...
1. Rule 1 Enabled Enabled YES
2. Rule 2 Disabled Input:
3. Rule 3 Invalid Alarm Input 1
4. Rule 4 Empty NONE
5. Rule 5 Empty NONE
6. Rule 6 Empty NONE
7. Rule 7 Empty Output:
8. Rule 8 Empty OSD
9. Rule 9 Empty Shot 2
10. Rule 10 Empty Alarm Relay 2 sec
11. Rule 11 Empty NONE
12. Rule 12 Empty
Right / Left: Select Period Time
Focus / Iris: Select Focus / Iris: Select Type
Menu Description Sub-menu / Description Default Setting
Exit Saves and exits the
menu.
Rule 1-12 Displays the status of a
rule on the right side of
the menu. There are four
(4) possible rule sta-
tuses. Enabled: The rule inputs and outputs are properly
defined and the rule is turned on.
Disabled: The rule inputs and outputs are defined
but the rule is turned off.
Invalid: The rule has a missing or invalid input or out-
put.
Empty: The rule has no inputs or outputs defined. Empty