WarmlyYours Snow Melting & Slab Heating - Manual (Page 24)

Installation Support • No Nonsense™ Warranty •(800) 875-5285 • www.WarmlyYours.com
Install Date:
Installed Under:
q
Concrete
q
Asphalt
q
Pavers
q
Other
If Pavers, thickness of the Paver:___________________ [2.5” (64mm) Max]
Material Depth Below Cable [2” (51mm) Min.]:
Material Depth
Above Cable [1.5” (38mm) Min.]:
Cable/Mat 1
Cable/Mat 2
Cable/Mat 3
Cable/Mat 4
Cable/Mat 5
Cable/Mat 6
Zone ID OHM Reading 1 -
Before Install
*MegOHM Reading 1 -
Before Install
OHM Reading 2 -
During Install
*MegOHM Reading 2 -
During Install
OHM Reading 3 -
After Install
*MegOHM Reading 3 -
After Install
PA
RT
#
Serial Number -
Internal Use Only
QC MEGOHM -
Internal Use Only
QC OHM -
Internal Use Only
W
armlyY
ours Snow Melt & Slab Heat W
arranty Registration
Thank
you
for
purchasing
your
new
W
armlyY
ours
Snow
Melting
System.
Once
the
report
form
is
completed,
please
copy
the
form
and
attach
a
copy
to
the
main
breaker
box,
or
give
to
the
homeowner
or
business
owner
.
Please
send
a
copy
to
W
armlyY
ours via mail, F
AX at (800) 408-1
100, or scan and send via e-mail to: [email protected].
Megohms readings are done across the assembly’
s green, ground wire to each conductor separately
.
Remember to keep a copy of this form with your warranty
.
*If at any time a reading does not exceed 10 Megohms, please halt installation and contact W
armlyY
ours.
HOMEOWNER/JOB LOCA
TION INFORMA
TION
Name
Phone
Address
Email
City
State
ZIP
Order Number
Job Name
ELECTRICIAN INFORMA
TION
Company Name Address City
State
ZIP
Installer Name
Phone
PA
VING/CONCRETE INST
ALLER INFORMA
TION
Company Name Address City
State
ZIP
Installer Name
Phone
10221-B 7/10