WarmlyYours TempZone Twin Important - Manual

Installation Support • No Nonsense™ Warranty • (800) 875-5285 • www.WarmlyYours.com
TempZone™ Twin
Important Installation Information
Please turn the page for more important installation tips
SAFETY
• Always wear flat-soled shoes when walking on the warming cable
• Do not place excessive weight (machinery, multiple tile packs) on the warming cable
• Do not place sharp objects or tools on the warming cable
• Cordon off the unfinished room to prevent unwanted access
2. Double layer of thinset mortar
• Suited to complex jobs
• May become a two-day installation
• Provides additional protection to the
warming cable when laying tiles
• Must prohibit access to the room while the first
layer is drying and before the second layer of
thinset cement is applied
1. Single layer of thinset mortar
• Ideal for small jobs
• Same-day installation
• Must be more careful when laying tiles
over the warming cable
TWO INSTALLATION METHODS
The cable has 4 layers
1. The twin heating wires are at the core
2. Teflon insulation surrounds the
heating wire conductors.
3. Braided sheath (to be grounded)
surrounds the two heating wires
4. Final layer of Teflon insulation
surrounds the braided sheath
CABLE CONSTRUCTION
AVOID HIGH PRESSURE POINTS
A High Pressure Point (HPP) is a force that tears open the Teflon layer which separates the core
heater wires from the ground sheath. This creates an electrical short and leaks electricity from the
core to the ground. A single HPP can be located even after the tile is placed, but several HPP’s
can generally NOT be located.
BRAIDED GROUND SHEATH
TEFLON INSULATION
HEATER WIRE CORE
HEATER WIRE CORE
TEFLON INSULATION