Vicor Westcor PFC Mini Power Factor Corrected AC-DC Switcher - Manual (Page 26)

UG:115 vicorpower.com Applications Engineering: 800 927.9474 Page 26
Current Share Boards - Optional Feature (Cont.)
Figure 14. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
1 2
3 4
5 6
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
Pin Description
1 P ow e r
2 T 1
3 - V 1
4 T 2
5 - V 2
6 No Connection
J1 Pinout
Figure 13. Mechanical Drawing
Specifications:
1. Power: 2 – 50 Vdc at 5 mA maximum.
2. Accuracy: +/-1 mV between -Vout connections.
3. Output current when not trimming up: +/-1 uA (VI-200/J00),
+/-5 µA (Maxi, Mini, Micro series).
4. Use four non-plated through holes with standoffs for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 series
converters (VI-200/J00).
6. CSB02 MUST be used for current sharing Maxi, Mini, Micro series
converters (Maxi, Mini and Micros).
PLEASE NOTE: THE CSB IS NOT INTENDED FOR HOT-SWAP APPLICATIONS.