TruXedo Deuce - Manual (Page 5)

___ 5 ___
STEP 4-A Attach cover assembly to the driver and passenger side rails as shown.
Simultaneously insert front header in both
driver and passenger side header stops.
insert and
Rotate up.
Lock both driver and passenger
side.
!
use cautIon, cover assembly is heavy. use
both hands to guide striker pins into position.
STEP 5 Rotate attached cover assembly over to the cab and engage strikers into latch brackets.
Installer should be inside the truck
box when rotating assembly over to
the front.
!
Striker Pin