Titus T3SQ-2 QuickStart Manual - Manual (Page 2)

Quick Start Manual - T3SQ-2
2
Q U I C K S TA R T M A N U A L
T3SQ-2
Loading the Software onto your PC
• Plug USB module into your PC
• Place Titus MLM CD into your PC drive
• Run the LHA Systems setup.exe file and follow the instructions for automatic installation.
• Also follow automatic instructions to load the required drivers onto your PC.
• Open the bacs.exe program by double clicking on
the icon.
• If no user levels are available in your software ver
sion password is “password”
• If user levels are available in your software version:
Password for installer is “password”, building ad
ministrator is “password2), Viewer is “password3”
• Go into the Tool-Bacs screen.
• Connect to the diffuser network by clicking the
“connect” icon below the word “file” on the screen.
• When using a USB module type in the serial num
ber on the box.
• When logging in using a TCP/IP network, type in
the IP address.
• Click on the “Connect bar”
• The diffusers will appear on the screen
• By pressing the “sync” icon the software will up
date information between controllers and
the software.
• Diffusers will now be displayed on
screen. All masters will display room and set point
temperature as well.