Regency Bellavista B36XT Medium Gas Fireplace - Manual (Page 58)

58
Regency Bellavista™ B36XT Gas Fireplace
INSTALLATION
FULL SCREEN ARCH DOOR AND FRAME INSTALLATION
Diagram 1
Diagram 2
Diagram 4
Diagram 5c Diagram 3a
Diagram 5a
Diagram 3b
Diagram 5b
Diagram 7
Diagram 6
Final Screen Install
1) Remove glass door (refer to glass door
removal in the manual).
2) Install 4 Phillips screws (supplied with
packaging) to the inside walls of the unit
(see Diagram 1 for locations).
Do not tighten the screws - leave them loose
for the next step.
3) Lift screen doors off of door frame to reduce
the weight during installation.
4) Mount the door frame onto 4 loosened screws
and retighten.
6) Install bottom mesh door .
a) Locate tabs on bottom mesh door.
b) Locate bracket on lower fl oor of unit.
c) Hook the tab on the bottom mesh door
over the bracket to install
7) Install top louver.
a) Locate tabs on top louver
8) Rehang screen doors on frame -
See Diagram 7.
Note: The door frame is adjustable up by 3/4"
to accommodate for fi nished fl ooring.
The door frame can also be adjusted out
3/4" from the unit to accommodate fi nishing
materials.
See Diagram 2
Bracket on unit for bottom mesh
door.
Bracket on unit for top louver
Tabs on bottom mesh door.
Tab on top louver.
5) Reinstall glass door.
b) Line up the tabs on top louver
with the brackets on the unit.
c) Hook the tab on the top louver
over the bracket to install.