Regency Bellavista B36XT Medium Gas Fireplace - Manual (Page 44)

44
Regency Bellavista™ B36XT Gas Fireplace
INSTALLATION
5) Repeat step 4 for left side panel.
5) Repeat step 4 for left side panel.
6) Reverse step 1.
6) Reverse step 1.
Final Installation
Final Installation
4) Remove 1 screw (see inset A), position right side panel in fi rebox -
position panel clip in place and secure with 1 screw (see inset B).
Tighten the screw.
4) Remove 1 screw (see inset A), position right side panel in fi rebox -
position panel clip in place and secure with 1 screw (see inset B).
Tighten the screw.
Location of hex
head screw
Diagram 6
Diagram 7
A
A
B
B
22"
4"
BLACK ENAMEL PANEL INSTALLATION
1) Remove the heat defl ector by removing the 2 screws securing the
heat defl ector to the top of the fi rebox (see Diagram 2).
Heat defl ector Diagram 2
Diagram 6
Diagram 1
2) Install the back panel fi rst - use care when clearing the burner assembly
and rear log tray, so panel is not scratched.
3) Install the top panel next - slide the panel in over top of the back panel
- orient the panel so the fold in the metal faces in (see inset A).
RIGHT BACK LEFT
TOP
Diagram 3
Diagram 4
Diagram 5
Fold
A