Regency Plateau PTO30IST Outdoor Gas Firetable - Manual (Page 16)

16
Regency Plateau ® Series Outdoor Gas Fireplace
INSTALLATION
CONVERSION FROM NG TO LP
1) Shut off the gas and allow unit to cool to room temperature.
3) Slide the burner to the left, away from the pilot assembly and lift out.
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one LP Conversion Kit
Conversion Kit # 376-972 Contains:
Qty. Part
# Description
1 904-655 Burner Orifi ce #45
1 904-529 5/32" Allen Key
1 910-101 LP pilot orifi ce
1 918-590 Decal "Converted
to LPG"
1 908-528 Red "LP" label
1 911-009 Hi/Lo conversion LP For 886
1 911-089 Propane Hose & Regulator 48 in.
1 919-000 Instruction Sheet
Pilot Cap
Burner orifi ce
5) Pull off the pilot cap to expose the pilot orifi ce. Using a 5/32" allen key,
remove pilot orifi ce and replace with LP pilot orifi ce.
4) Remove burner orifi ce with a 1/2" wrench. Use another wrench to hold on
to the elbow behind the orifi ce. Discard orifi ce.
2) Remove burner buy removing 6 screws in locations shown below. If glass
crystals are installed, move the crystals out of the way to reveal screws.
6) Re-install pilot cap.
7) Reinstall burner assembly.
8) Adjust aeration accordingly.- see aeration adjustment section manual for
details.