Regency Bellavista B41XTE Large Gas Fireplace - Manual (Page 58)

58
Regency Bellavista™ B41XT Gas Fireplace
MAINTENANCE
1) Shut off electrical supply.
2) Remove Full Screen Door and bottom Louver if installed.
3) Remove the glass door - see instructions in manual.
4) Remove the logs, lava rock and vermiculite if installed.
5) Remove the brick or inner panels if installed - see instructions in manual.
6) Remove the burner and rear log tray - see below.
Diagram 1: Remove the left and right screws.
Diagram 2: Slide burner assembly to the right
and then remove.
8) Remove the 2 screws securing the rear log tray and lift out. Diagram 3
Diagram 3
7) Slide the burner assembly to the right to release it from the orifi ce,
then lift it out.
9) Remove the 2 screws securing the base tray - lift base tray up and
out. Diagram 4a and 4b.
Diagram 4a
Diagram 4b
10) Replace the bulbs as necessary.
Note: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
11) Reverse steps 9 - 1.
Base Tray
ACCENT LIGHT BULB REPLACEMENT