beautypg.com

Installation, Louvers / flush panel installation – Regency Bellavista B41XTE Large Gas Fireplace User Manual

Page 51

background image

Regency Bellavista™ B41XT Gas Fireplace

51

INSTALLATION

LOUVERS / FLUSH PANEL INSTALLATION

1. To install the lower louver or fl ush panel - line up the 2 hinges with
the brackets in the unit as shown below.

2. Attach the each hinge to the corresponding bracket with 2 screws
as shown below.

3. Flip the hinges down to 90° - line up the louver / fl ush panel as
shown below.

4. Fasten the hinges to the louver / fl ush panel with 3 screws each as
shown below.

5. Flip up the louver / fl ush panel to close.

6. To install the top louver / fl ush panel - line up the 2 tabs on the
louver / fl ush panel with the corresponding bracket clip on the inside
top of the unit (see below).

Location of bracket clips in unit.