Regency Bellavista B41XTE Large Gas Fireplace - Manual (Page 52)

52
Regency Bellavista™ B41XT Gas Fireplace
INSTALLATION
FULL SCREEN ARCH DOOR AND FRAME INSTALLATION
Diagram 1
Diagram 2
Diagram 3
Diagram 3a
Diagram 2a
1) Remove glass door (refer to glass door removal in the manual).
2) Install 4 Phillips screws (supplied with packaging) to the inside
walls of the unit (see Diagram 1 for locations).
Do not tighten the screws - leave them loose for the next step.
0" +3/4"
+3/4"
Factory
Setting
6) Mount the door frame onto 4 loosened screws from step 2 and retighten.
Note: The door frame is adjustable up by 3/4" to accommodate for
fi nished fl ooring.
The door frame can also be adjusted out 3/4" from the unit to
accommodate fi nishing materials. See Diagram 4.
3) Remove 2 screws from inside the fi rebox in the location shown below.
4) Slide bracket into slot on the back of the full screen door frame.
See diagram 3.
Use these holes to
accommodate thicker
fi nishing materials (+3/4")
Diagram 4
5) Lift screen doors off of door frame to reduce the weight during
installation.