BT 2100 Classic - Manual (Page 31)

On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
30
The display will show AUTO.
Press the DOWN button until CUSTOM is
displayed.
The available bases will be displayed.
Use the UP or DOWN button to select
the base you want to register your
handset to.
Press the OK button.
The display will show CODE?.
The display will show _ _ _ _ _ _ _ _ .
Enter your 4 digit base system code
(once only).
Press the OK button.
At the base:-
Press and hold the ᮤ Skip button on
the base until the PLAY button begins
to flash.
On the handset:-
The display will show 2, 3, 4, 5, 6.
Use the UP or DOWN button to select
the handset you wish to register.
Press the OK button to confirm.
The display will show REGIST and then
return to:
C OK
▲
▼
On the handset:-
Press the UP or DOWN button until
the display shows BASE.
Press the OK button.
The display will show REGIST.
Press the OK button.
To register a new handset to a
base (if you have changed System
code from 0000)
▼
Note
To check whether registration has been
successful, press the
GREEN PHONE button
and listen for the dial tone. If there is no
dial tone either you have not registered the
handset correctly or the telephone line cord
is not plugged in properly.
On the handset:-
Press the UP or DOWN button until
the display shows BASE.
Press the OK button.
The display will show REGIST.
Press the OK button.
The display will show AUTO.
Press the OK button to confirm.
The display will show REGIST and then
return to:
C OK
C OK
-2-
C OK
▲
▼
C OK
CODE
▲
▼
ᮤ Skip
C OK
-2-
C OK
C OK
▲
▼