BT 2100 Classic - Manual (Page 20)

On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
19
The Answer button on the base will
come on to indicate that the answering
machine is in Answer and Record
mode.
Note
If you record a new outgoing message it will
overwrite the previous one.
Note
Once you have recorded your outgoing message
the answering machine will automatically
be switched on. Remember, if the last message
recorded was the Answer Only outgoing
message then the answering machine will be
on but callers will not be able to leave messages.
To record your own Answer Only
outgoing message (OGM)
Press the UP or DOWN button until
the display shows ANSWER.
Press the OK button to confirm.
After a slight pause PLAY is displayed.
Use the UP or DOWN button to scroll
to RECORD.
Press the OK button to confirm.
MESSAGE is displayed.
Use the UP or DOWN button to scroll
to OUT MSG.
Press the OK button to confirm.
ANSW REC is displayed.
Use the UP or DOWN button to scroll
to ANSWER.
Press the OK button to confirm.
Hold the handset to your ear. You will
hear, “Please record your message after
the tone”
. After you hear a long beep in
the earpiece, speak your outgoing
message into the handset. Whilst you
record your message, REC is displayed.
Press the OK button to end recording.
PLAY is displayed and your Answer
Only outgoing message will be played
back through the handset earpiece
followed by a long beep.
Once playback has finished DONE is
displayed then RECORD.
Press the C button twice to exit.
The Answer button on the base will
flash to indicate that the answering
machine is in Answer Only mode.
▲
▼
C OK
C OK
▲
▼
C OK
▲
▼
C OK
▲
▼
C OK
C OK
Helpline
If you experience any difficulties using your
BT On-Air 2250 Classic, please call the BT
On-Air Helpline on 0870 240 4682.