BT 2100 Classic - Manual (Page 22)

On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
21
To adjust the time allowed for
recording incoming messages
It is possible to adjust the time
available to leave a message. The
options are 30 seconds, 2 minutes, 4
minutes and unlimited message length.
The answering machine has a total
recording time of up to 12 minutes.
Press the UP or DOWN button until
the display shows BASE.
Press the OK button to confirm.
REGIST is displayed.
Press the UP or DOWN button until
the display shows PARAM.
Press the OK button to confirm.
After a slight pause F1 is displayed.
Press the 4 button.
Press the 3 button.
Press the UP or DOWN button to
scroll to the required message length:
1 = 30 seconds, 2 = 2 minutes,
3 = 4 minutes, 4 = unlimited length.
Press the OK button to confirm.
F43 is displayed.
Press the C button twice to exit.
▲
▼
C OK
▲
▼
▲
▼
C OK
C OK
C OK
4
GHI
3
DEF
To adjust the number of rings
before the answering machine
switches on
Press the UP or DOWN button until
the display shows BASE.
Press the OK button to confirm.
REGIST is displayed.
Press the UP or DOWN button until
the display shows PARAM.
Press the OK button to confirm.
After a slight pause F1 is displayed.
Press the 4 button twice.
Either:
Press the UP or DOWN button to
scroll to the required number of rings,
between 2 and 5 and then press the
OK button to confirm.
Or
Enter the number using the keypad.
If 1 (Time Saver) setting is chosen
there will be 4 rings if you have no new
messages, and 2 rings if there are new
messages.
F44 is displayed.
Press the C button twice to exit.
▲
▼
C OK
▲
▼
▲
▼
C OK
C OK
C OK
4
GHI
Note: Timesaver
If you call from another telephone and it
rings 4 times, there are no new messages.
If the call is answered after 2 rings there
are new messages to listen to.