BT 2100 Classic - Manual (Page 12)

On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
11
If an incoming call arrives while you are already
engaged on a telephone call, you will hear a soft
beep every 5 seconds (this beep is not audible
to the person you are speaking to).
Instead of the engaged tone, the second caller
will hear an announcement to hold on as you
are aware that there is a second call.
Call Waiting
You can answer the second call,
without disconnecting your first caller,
by pressing the RECALL button. The
first caller will be put on hold.
When you have spoken to the second
caller you can return to the first caller
by pressing the RECALL button again.
You can switch back and forth between
the two calls without disconnecting
either if you wish.
If you wish to disconnect the first call
press the RED PHONE button after
speaking to the first caller.
The handset will then ring. Press the
GREEN PHONE button again and
continue with the second caller.
The second caller will only be charged
for their call from the moment you
answer and not while they are waiting
for your initial contact.
To use Call Waiting
Press the DOWN button until CALLS is
displayed.
Press the OK button to confirm.
Press the DOWN button until TIME is
displayed.
Press the OK button to confirm.
The length of the last call will be shown
on the display.
Press the C button twice to exit.
To view the length of the last call
Recall
Recall
You can store up to 50 of your most frequently
used names and numbers.
50 Name and number directory
Press the DOWN button until PHONE BK
is displayed.
Press the OK button to confirm.
To store a name and number in
the directory
C OK
▼
C OK
Quick guide to directory settings menu
1 PHONE BK 11 NEW
12 EDIT
13 DELETE
▼
C OK
▼
C OK
C OK
To delete all numbers shown in the
redial and calls list
Press the DOWN button until CALLS is
displayed.
Press the OK button. The display will
show DELETE.
Press the OK button to confirm. The
display will show DONE. All numbers in
the redial and calls list have been
deleted.
Press the C button twice to exit.
▼
C OK
C OK