BT 2100 Classic - Manual (Page 28)

On-Air 2250 Classic ~ 5th Edition ~ 4th July ’02 ~ 4503
27
To change the remote access code
Press the UP or DOWN button until
the display shows BASE.
Press the OK button to confirm.
REGIST is displayed.
Press the UP or DOWN button until
the display shows PARAM.
Press the OK button to confirm.
After a slight pause F1 is displayed.
Press the 4 button.
Press the 1 button.
Enter your old four digit code
(0000 if not changed).
You can operate your answering machine from
any external Touchtone™ phone by phoning
your BT On-Air and entering your remote
access code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
Important
You must change the remote access code from
the default setting of 0000 for your remote
access to function.
▲
▼
C OK
▲
▼
C OK
Enter your new 4 digit code.
Re-enter your new 4 digit code.
F41 is displayed.
Press the C button twice to exit.
C OK
4
GHI
1
Remote access
WARNING
If you enter your old code incorrectly
the display will show F41. Please
check that you have not changed the
code. Press the
C button twice to exit
and try again with the correct code.
If you have forgotten your remote
access code you should call the
Helpline on
0870 240 4682 and
you will be advised on how to reset
your telephone to its factory settings.