Schwank ThermoControl Plus 2 - Manual (Page 9)

- 9 -
4.2 Display and change of occupied/unoccupied temperature
The desired temperature for each control circuit can be programmed separately
The temperatures can be
changed within the range:
+3…+35 °C / 37 ...95 ºF
Push the DISP button to switch the current display
back to the main display (automatic after one
minute if no button pushed).
The current
occupied/unoccupied
temperatures can be
displayed by pushing
or
button.
The values can be modified
by pushing
+/- .
All modifications are saved
immediately.