SATEC PM174 Quick Start - Manual (Page 10)

05-12001-3
AC0140
Figure 8 COM1: Telephone Line Connection
COM1 Ethernet Connection
AC0139
05-12001-4
RJ45
Figure 9 COM1: Ethernet Connection
Communicating via the Internet
If you are communicating through the Ethernet port, define the IP address of your meter
on the network.
1. On the Instrument Setup tab, select Internet Site.
2. Click on the Connection tab.
3. Select the IP Address and type in the IP address of your meter. The default IP
address preset at the factory is 192.168.0.203.
BG0452 REV.A5 10